Product Class
With advanced production equipment, all products undergo strict quality testing, ,and are exported to all over the world.
Network
Productshome > Products
View More>>   
 
 

Bimetallic barrel for injeciton moulding machine
Our company has not only got the remarkable achievement on the production of normal bimetallic screw and barrel,also we have deeply researched on the barrel and screw for the special engineering plastic,for now much of engineering plastics add the calcium,kaolin,red clay, silica or add Glass fiber, carbon fiber, boron fiber and halogen free plastic to make the original plastic much better to adapt the specific plastic products.On the other hand, it may make the screw and barrel wear and corrosion quickly, In order to solve this problem,we have invented a kind of special alloy powder,whose ingredient contains 25%~50% Wc tungsten carbide.It makes the service life of screw and barrel much more longer than the other kinds of bimetallic screws and barrels.

 

material Grade A Wc-10 tungsten carbide alloy
Processing range Inner diameter : ¦Õ16mm-¦Õ450mm ,effective length to 9000mm
Processing technic

Centrifugal casting,alloy layer reach 1.5mm-2mm one side,maximum reach 3mm-6mm one side
Alloy powder composition Wc(50%-60%),C,Si,Cr,B,Ni,Mo,Co,etc
The index of hardness HRC62-65,the service life of 5-6 times longer than the nitrided one
Characteristics of alloy powder High wearing resistance,high corrosion resistance and high temperature resistance
Apply to Nylon plus 30% - 50% glass fiber, bakelite, magnetic powder, ceramic powder, aluminum magnesium powder, iron powder, LCP and halogen-free flame retardant plastic

 

material

Grade B Ni-20 Ni-based alloy

Processing range

Inner diameter : ¦Õ16mm-¦Õ450mm ,effective length to 9000mm

Processing technic

Centrifugal casting,alloy layer reach 1.5mm-2mm one side,maximum reach 3mm-6mm one side

Alloy powder composition

Ni,C,Si,Cr,B,Mo,Co,Wc(20%-25%),etc

The index of hardness

HRC60-63,the service life of 4-5 times longer than the nitrided one

Characteristics of alloy powder

High corrosion resistance,high wearing resistance and high temperature resistance

Apply to

PE, PC, PVC, LCP, acrylic, transparent plastic, halogen free flame retardant plastic, corrosion resistance of resin plastic, etc

 

material

Grade C Fe-30 Fe-based alloy

Processing range

Inner diameter : ¦Õ16mm-¦Õ450mm ,effective length to 9000mm

Processing technic

Centrifugal casting,alloy layer reach 1.5mm-2mm one side,maximum reach 3mm-6mm one side

Alloy powder composition

Fe,C,Si,Cr,B,Mo,Ni, Co,etc

The index of hardness

HRC59-61,the service life of 3-5 times longer than the nitrided one

Characteristics of alloy powder

Wearing and corrosion resistance

Apply to

Nylon plus 10% -30% glass fiber, PC plus glass fiber, PVC plus calcium powder, recycled plastics processing, etc

 

Bimetallic barrel for extrusion machine

 

material

Grade A Wc-10 tungsten carbide alloy

Processing range

Inner diameter : ¦Õ16mm-¦Õ450mm ,effective length to 9000mm

Processing technic

Centrifugal casting,alloy layer reach 1.5mm-2mm one side,maximum reach 3mm-6mm one side

Alloy powder composition

Wc(50%~60%),C,Si,Cr,B,Ni,Mo,Co,etc

Index of hardness

HRC62-65,the service life of 5-6 times longer than the nitrided one

Characteristics of alloy

High wearing resistance,high corrosion resistance and high temperature resistance

Apply to

PE pipes, PVC, PPR, wood and plastic, XPS extruded plate, wire and cable, blown film machine, recycled plastic, etc

 

material

Grade C Fe-30 Fe-based alloy

Processing range

Inner diameter : ¦Õ16mm-¦Õ450mm ,effective length to 9000mm

Processing technic

Centrifugal casting,alloy layer reach 1.5mm-2mm one side,maximum reach 3mm-6mm one side

Alloy powder composition

Fe,C,Si,Cr,B,Mo,Ni, Co,etc

Index of hardness

HRC59-61,the service life of 3-5 times longer than the nitrided one

Characteristics of alloy

Wearing and corrosion resistance

Apply to

PE pipes, PVC, PPR, wood and plastic, XPS extrusion board, blown film machine, recycled plastic, etc

 

Bimetallic screw for injeciton moulding machine
Processing range:inner diameter¦Õ12mm ¨C ¦Õ280mm,,the effective length reach 8000mm 
     Grade-A superhard and high wearing resistance bimetallic screw: the base material is imported Sweden Km22  steel and superhard high speed steel, which is  high wearing resistance, high toughness and high corrosion resistance, hardness could reach HRC59-64, allying for processing nylon plus 50% ~ 60% glass fiber, bakelite, magnetic powder, ceramic powder, magnesium powder, iron powder, copper powder, aluminum and other special plastic, the service life of 5-8 times longer than the nitrided one.
    Grade B strong corrosion resistantance bimetallic screw:take base material of  improted GRC-276, GE113 ,which is strong temperature resistance and high corrosion resistance, applying for the special plastic which is high speed,high temperature and high wearing and corrosion, nylon plus 20% - 40% fiber glass, halogen-free flame retardant plastic, PPE flame retardant plastic, XPS flame retardant plastic special plastics through solid solution plus aging hardening,  the service life of 4-6 times longer than the nitrided one.
    Grade-C wearing resistance bimetallic screw: take base material of 38 CrMoAla, SKD61, din 1.8550 and1.8519 ,screw flight and bottom cladding alloy powder, the surface hardness can be reach HRC60 ~ 62, the thichkness of alloy layer is 1 mm - 2.5 mm, with extremely high wear resistance and corrosion resistance, applicable to PC, PE, PVC and other plastic processing.
bimetallic screw for PC only:take base material of special stainless steel, 42 CrMo, then hardening and chroming ,suitable for processing transparent plastic products, such as lens, white material, back plate, guide plate, acrylic products, the service life is 3-5 times longer than the nitrided one .


Bimetallic screw for extrusion machine
Specification: ¦Õ15 mm -¦Õ250 mm , L/D = 15 ~ 45
    Screw take base material of 38 CrMoAla or SACM645, SKD61, din 1.8519 and 1.8550, material, screw surface spraying nickel base tungsten carbide alloy, alloy thickness 1.5mm ~ 1.5 mm, hardness reach HRC62-65, with the characteristics of  high wearing resistance and corrosion resistance ,mainly apply for the PVC pipes, PE plastic foam, EPE pearl cotton board, XPS extruded plate, PE pipe, PPR pipe, cable machine, chemical fiber machine, wood and plastic, blown film machine, recycling granulator machine, the service life is 3-5 times longer than the nitrided one.
    Screw can be selected from ordinary, gradual, pinned,shielding, separating and exhausting type, the compression radio of screw can be designed according to different raw materials and machinery.

Bimetallic conical twin screw and barrel
    Bimetallic conical twin barrel has got the nation patent,and we are the only company in manufacturing the bimetallic conical twin barrel.Adopting the technique of rotary casting alloy,it makes the alloy powder¡¯s compactness and wearing resistance the same as the bimetallic single barrel thus solving the defect of short service life and low wear-resisting of nitrided conical twin barrel,and rewrite the history of only manufacturing bimetallic single barrel but no bimetallic conical twin double barrel in domestic land.
    Wc-10 tungsten carbide alloy ,with the characteristics of high hardness ,high hard-wearing and corrosion resistance ,and high temperature resistance ,the hardness of alloy layer reaches HRC60-65,thus having the service life of 5-8times longer than the nitrided one.It is suitable for processing PVC plus calcium powder,building plastic template, pipe, sheet, ,WPC , hanging plate and other engineering plastics.
    Grade A screw: the base material is SKD61,Din 1.8519 or 1.8550,with the hardening then nitriding, the surface hardness of screw can reach HRC60-65,thus having the characteristics of  high wearing and corrosion resistance .
    Grade B screw : the base material is 38CrMoAla,the screw flight through the high temperature spraying Ni-based alloy powder,the surface hardness can reach HRC58-62,thus having the characteristics of high wearing and corrosion resistance.


Bimetallic parallel twin screw and barrel
       Bimetallic parallel twin barrel has got the nation patent,and we are the only company in manufacturing the bimetallic twin barrel.Adopting the technique of rotary casting alloy,it makes the alloy powder¡¯s compactness and wearing resistance the same as the bimetallic single barrel thus solving the defect of short service life and low wear-resisting of nitrided twin barrel,and rewrite the history of only manufacturing bimetallic single barrel but no bimetallic twin double barrel in domestic land.
    Wc-10 tungsten carbide alloy ,with the characteristics of high hardness ,high hard-wearing and corrosion resistance ,and high temperature resistance ,the hardness of alloy layer reaches HRC60-65,thus having the service life of 5-8 times longer than the nitrided one.It is suitable for processing PVC plus calcium powder,building plastic template, pipe, sheet, ,WPC , hanging plate and other engineering plastics.
    Grade A screw: the base material is SKD61,Din 1.8519 or 1.8550,with the hardening then nitriding, the surface hardness of screw can reach HRC60-65,thus having the characteristics of  high wearing and corrosion resistance .
    Grade B screw : the base material is 38CrMoAla,the screw flight through the high temperature spraying Ni-based alloy powder,the surface hardness can reach HRC58-62,thus having the characteristics of high wearing and corrosion resistance.


Bimetallic screw and barrel for rubber machine
    The bimetallic barrel for rubber machine is produced through high-temperature and speed centrifugal casting,the thickness of the alloy layer could reach 2mm-3mm one side,thus having the  characteristics of high hardness , high wearing and high corrosion resistance . 
The screw flight spray the WC-10 tungsten carbide alloy powder,the thickness of alloy layer is 1.5mm-3.5mm, the hardness can reach HRC58-62.It is suitable for the rubber machine of the pinned cold feeding,ordinary cold feeding,exhaust cold feeding,new kind of hot feeding,rubber filtering,rubber injection ,magnetic strip.